Swivel Kitchen Faucets (Everything You Need to Know!)

Whether you are searching for a touch-activated or manual kitchen faucet, you want to make sure that the kitchen faucet can swivel. From washing hands covered in food to hand washing a cookie sheet or draining pasta, a spout that swivels easily will make your life simpler and comfortable, at least in a kitchen.

Do kitchen faucets swivel?

Whether a kitchen faucet would swivel or not depends on the arc and swivel support. A kitchen faucet comes with a swivel capacity in various shapes and designs depending on a kitchen designer’s ideas. Most kitchen faucets offer a 180-360 swivel support, which makes it possible to swivel easily.

When you have a kitchen faucet that swivels without any convenience, it becomes easier to wash anything on the sink. Choosing a kitchen faucet that swivels well depends on the quality, durability, versatility, and swivel support.

While most brands offer limited lifetime warranty, make sure that you buy a kitchen faucet that suits your choices. Moreover, if you don’t want a faucet that might flood your kitchen, make sure you understand the swiveling degrees. 

Do Moen kitchen faucets swivel?

For a touchless swiveling kitchen faucet, Moen Kitchen faucets are an ideal choice. With a lifetime limited warranty, it would cover everything except any damage caused during the installation period.

Do Delta kitchen faucets swivel?

If you want a Non-Electronic lifetime warranty covering any defect for a faucet that swivels well, Delta faucets are quite remarkable. In case you don’t want a flood on your hands and want a faucet that swivels under 180 degrees, Delta 136 DST is a perfect choice.

Do Kohler kitchen faucets swivel?

Yes, Kohler faucets swivel well. Kohler is one of the oldest and most renowned companies known in the market. They are most well-known for their swiveling durability and their simple designs. If you want a spout that rotates a full 360 degrees, Kohler faucets will offer you 8½-inch clearance for the highest flexibility.

Do High Arc kitchen faucets swivel?

With an elegant design, high arc kitchen faucets are made with tall spout faucets to reach up and swivel above the sinks without causing a flood. The spouts are known as standard spouts providing 3’’-5″ over the sink. 

However, there is a possibility to splash on the shallow sinks.

Does Grohe kitchen faucet swivel?

Grohe kitchen faucets offer both swivel support and specific user-centric features that outsmarts other brands in the market. While there are various Grohe faucets aesthetically pleasing, Ladylux and budget- friendly Eurodisc are noteworthy.

Do Pfister kitchen faucet swivel?

With a Pfister Lifetime Limited Mechanical & Pfinish Warranty, they provide high-quality swivel faucets and give you years of elegance and reliability. However, their post-sale customer service is spotty.

Do pull down kitchen faucets swivel?

Well, the answer is definitely Yes.  A pull-down kitchen faucet provides either 190 or 360-degree swivel support. If you are going for a stationary kitchen faucet, then pull-down is the perfect faucet for you. 

How does a kitchen faucet swivel?

The kitchen faucets with spouts help the faucet swivel and control water flow accordingly. The spouts aren’t connected to the main body controlling water flow. The spout sleeve slips across the upper and lower O-ring to prevent water leakage and help the spout swivel.

However, when the spout assembly is too tight to rotate or when O-rings get dirty, it will prevent the faucet from swiveling. A piece of lifesaving advice would be to clean the inside parts of the faucet.

How do you fix a kitchen faucet that won’t swivel?

It’s quite a common issue to have a kitchen faucet that’ won’t swivel. The problem occurs when the sleeve inside the faucet’s neck has scratched against the metal, causing the friction to stop it from moving freely. 

However, there’s nothing to worry about such minor inconveniences. To fix a kitchen faucet, all you’ll need are a flashlight, a screwdriver, a Philips head screwdriver, an Allen wrench, and channel locks.

Step 1: Stopping the water flow and loosening the screws

When the kitchen faucet doesn’t swivel, it disrupts workflow in the kitchen. In that case, turn off the supply of both hot and cold water under your kitchen sink. 

You might see two Philip head screws holding the faucet via the washer. Loose the screws by turning them to the left. 

Step 2: Dismantling the faucet

The screw holding the faucet handle might prevent the faucet from moving whenever you turn the water on and off. You can easily take the screw out with a screwdriver. To remove the handle, use an Allen wrench to half turn a screw to the left side ( 3 mm is a standard size for kitchen faucet screws)

Next comes the removal of another layer: a round metal that holds the faucet carriage in place. You can twist it off with your hand as it’s made in the same soft metal.

If it gets stuck, wrapping a towel or a few channel locks can help in this process.

Step 3: Unfastening the cartridge and the sleeve

To unfasten the cartridge, pull it up from inside of the faucet neck. If you have loosened the screws enough under the counter, you can see a thin plastic sleeve inside the faucets.

In the end, you will find the edge of where the sleeve was attached. Rub it right away before you put the faucet together. You can also use lubricants like grease to the sleeve. Lastly, turn on the water pipe.

CONGRATULATIONS, YOU SAVED BOTH OF YOUR TIME AND MONEY.

How do you lubricate a swivel faucet?

Sometimes, a faucet gets very difficult to swivel. Just like a door or lock, a lubricant can solve the problem instantly. It might not be as easy as the door or hinges, but here are few steps you might follow to lubricate a swivel faucet.

Step-1: Removing the plastic cap covering the Allen screw

Turn off both the cold and hot water supply. Remove the plastic cap covering the Allen screw and unscrew the Allen screw with an Allen wrench. Take out the handle stem.

Step-2: Turning the metal to the clockwise direction 

You can remove the metal cap covering the faucet ball with a wrench to turn it clockwise and loosen the threads. Wrap the cap’s base with a soft cloth or towel if the cap doesn’t have a smooth surface.

Step-3: Removing the ball from the faucet and disassembling the spouts

To remove the ball from the faucet body, pull it up from the stem. Next, Dismantle the seats to prepare them for lubrication.

Step-4: Applying lubricants on the faucet body

There are two rubber o-rings on the faucet body and inside of the spout respectively. First, take a small amount of silicone faucet grease on both of the O-rings and press the spout to make sure it swings back and forth. 

Finally, apply grease on the rubber seats and put them back on the top of the springs.

Step-5: Tightening the cap securely

Once you apply grease on the rubber seats, make sure the springs and seats remain in their positions, and the tab adjusts to its slot entirely in the faucet body. While holding the ball in place, you should tighten the cap and the Allen screw.

Once you can freely move the handle in full motion, it will no longer squeak. Thus you can fix it without a plumber’s notice!

How do you fix a leaky swivel faucet?

A leaky swivel faucet can both waste water and money at the same time. But don’t worry about it. We’ll show you how you can fix a leaky swivel faucet in your own home.

Types of equipment Required

  •  4-in-1 screwdriver
  •  Allen wrench
  •  Pliers
  •  Slip joint pliers

Step-1: Understanding the faucet anatomy and its repairing tools

Before repairing any faucet, we recommend understanding the faucet anatomy. The repairing kits consist of the ball, springs, seats, O-rings, and a small repair tool. With these tools, you will be able to repair the faucets quickly.

Step-2: Unhook the Allen screw

Put off the water supply to stop the leaking faucet for the time being. Uncover the decorative cover which hides the handle to reveal the Allen screw. Until it’s too easy to lift the handle, continue rotating the screw counterclockwise.

Point to be noted: If water is dripping off from the faucet handle base, simply consider removing the handle and tightening the ring. If the faucet leaks at the end of the spout, replacing the seats and springs would be the best decision.

Step -3: Remove the cap and replacing the rotary ball

At this point, you may take out the cap with slip-joint pliers. Before replacing the ball, lift it and inspect it well to confirm any presence of scratches. If you found any scratches, replace them.

Step-4: Remove the seats and springs

A screwdriver would be handy to unscrew the seats and springs. After removing the old seats and springs, add the new rubber seats over the top and new springs in the recess.

Finally, please turn on the cap with the adjusting ring and fix it tightly with the pliers. Check the water flow to detect any leakage. Once you replace the dripping faucet handle, your job is complete!

Installing a swiveling kitchen faucet and its maintenance can be challenging if the quality and durability are not up to the mark. In that case, comparing the available brands in the market would be a wise decision. Like always in a dilemma, never hesitate to reach out with your questions!

Frequently Asked Questions:

Why and How Often Kitchen Faucets Go Bad?

Anti Scald on Kitchen Faucets?

Do Kitchen Faucets Come with Hoses?

Are Kitchen Faucets & Fixtures Recyclable?